SOLDER ASAHI 0.8mm 250G - The Malaysian Principle
It is used to assemble electronic components on a printed circuit board as well as tin-plated wires as well as various fittings of tin wire.
In order to select the appropriate tin wire, it is necessary to identify the main parameters on the spool. Except for the following parameters, for some other uses, other parameters should be checked.
The most important parameter of tin wire, which depends on the type of workpiece to be soldered and also the heat / power of the winding being used, is the percentage of tin to the lead of soldered wire. The second parameter is the thickness or the same diameter of the tin wire, which for common use, uses a thickness of 0.8 mm. The last parameter is the weight of tin wire, which depends on the amount of consumption to be selected
Asahi Malaysia is one of the most famous factories in tin, tin, tin and similar materials in Iran. However, in recent years, due to the supply of counterfeit products and similar products, the choice of primary and primary solder wires for the final consumer is difficult. The mechatronics shop is committed to providing Malaysia's top quality product, which can facilitate the purchase and ensure the receipt of the original product.
The ratio of 63% tin to 37% lead
Thickness of 0.8 mm
Weight 250 grams
|TECHNICAL LEVEL||SEMI PROFESSIONAL|