BRUSHLESS MOTOR CONTROLLER MODULE IN ELECTRONIC MODULES
Brushless motor control module (improved version)
With this range, there are several types of three-wire and four-wire brushless motors.
Working Voltage: 5 to 12 Volts Dc
Flowable: less than 1.2A
Speed control range: 0% to 100%
Overcurrent protection (flow) OCP - OVER CURRENT PROTECTION
Reverse voltage protection
Dimensions: 31x45 mm
The brush-less motor line must be pressure sturdiness when receiving a terminal drive plate, poor contact will burn out the chip phase operation deficiency. If there is a gap between the board terminals and the fixed screw, please use a coarser line connected to the board.